REMIC C5300 LB/WL6 Cello/Violone – Live mic. for wireless systems

C5300 LB/WL6 Cello/Violone – Live Mic. for Wireless Systems

The REMIC C5300 LB/WL6 Live supplied with a TA4F connector allows you to connect the REMIC microphone to SHURE (FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M, AD1) transmitter modules with TA4M connector.

Due to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES has been designed to support wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.

The REMIC C5300 LB/WL6 Live is based on the same principle as the C5300 LB Live model, but is supplied with a different connector – the TA4F connector, which allows you to connect your C5300 LB/WL6 microphone directly to SHURE wireless systems

Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.

MORE ABOUT THE “LB/WL6” MODEL:

The LB/WL6 microphone model is based on the same principle as the normal LB model only with a different connector and designed to support wireless transmitters with unbalanced input circuits and a BIAS voltage of 3 to 8 volt (instead of 48 volt). It delivers a natural, but more “dry” and “woodish” sound response in comparison to the “Studio” model.

The “LB/WL6” model represents the highest suppression of ambient sound sources ever achieved by a condenser microphone. So if you need a microphone with low acoustic feedback response, the C5300 LB/WL6 is the answer.

At the same time the microphone will maintain the aesthetic appearance of the instrument towards your audience, since there are no clamps and clips in order to mount and hold the microphone, you also retain a full and undisturbed view of the fingerboard.

With or Without Built-In Windshield

Choose whether you want the microphone with or without a built-in windshield. The built-in windshield is designed  to drastically reduce wind noise in open air performances. The windshield is placed inside the microphone and is therefore invisible and non-removable. With the built-in windshield option, you do not need to add any other windshields to your microphone. Choosing the variation with the built-in windshield will not change the quality of the microphone in other performance contexts.

Any publication of REMIC Audio on this website may include technical inaccuracies or typografical errors. Changes may frequently be made to these publications

All products and publications of REMIC Audio are subject to change without notice.

All products of REMIC Audio including designs, technical functionality and placement of function is protected, unauthorized reproduction or distribution of these products or parts thereof is considered as unlawful, which we may act upon.